Back to Blog
How-to Guides 2026-11-21 Quest Q-jet 0 views

How to Assemble an AeroTech K805G-PS RMS-54/1706 Reload Kit

How to Assemble an AeroTech K805G-PS RMS-54/1706 Reload Kit

Step-by-step guidance for assembling the AeroTech K805G-PS RMS-54/1706 reload kit, including required hardware, key components, and safety notes for high-power rocketry.

What the K805G-PS Reload Kit Includes

The AeroTech K805G-PS RMS-54/1706 reload kit is a high-power motor reload that uses AeroTech's aluminum-cased reusable motor system (RMS). The kit contains one reload with all internal motor components and FirstFire Initiators. The propellant is AeroTech's Mojave Green composite formulation, which produces a brilliant green exhaust plume with moderate smoke. This is a Plugged/Smoke motor reload, meaning it does not have a motor-actuated delay or ejection charge—it must be used with a timer, altimeter, or radio-activated recovery system.

Assembly Steps for the K805G-PS Reload

You will need the AeroTech RMS-54/1706 motor hardware (sold separately) to complete the motor. The hardware is available as a complete set or as individual parts. Follow these steps to assemble the reload kit.

  1. Gather Required Hardware: Ensure you have the RMS-54/1706 motor hardware set, including the casing, forward closure, aft closure, and any O-rings. The reload kit includes all internal components and initiators.
  2. Install the Forward Seal Disc (54FSD): This motor requires installing a forward seal disc (54FSD) during assembly. Place the disc into the casing before adding the propellant grains. Refer to the manufacturer's instructions for exact positioning.
  3. Load Propellant Grains and Components: Insert the propellant grains and any included spacers or liners according to the supplied instructions. The reload kit includes all internal motor components.
  4. Attach the Forward and Aft Closures: Secure the forward closure and aft closure to the casing. Ensure all O-rings are properly seated to prevent gas leakage.
  5. Install the FirstFire Initiator: The reload kit includes FirstFire Initiators. Insert the initiator into the motor as directed by the instructions. For plugged motors, no ejection charge is used.
  6. Final Inspection and Preparation for Flight: Verify that all components are tight and correctly aligned. Since this is a plugged motor, connect it to your chosen recovery system (timer, altimeter, or radio-activated system) before launch.

Key Specifications and Requirements

  • AeroTech K805G-PS RMS-54/1706 Reload Kit (1 Pack) - 11805P: Motor diameter: 2.125 inches (54 mm); casing length: 17.20 inches (437 mm); propellant weight: 871 grams; motor weight: 1543 grams. These dimensions confirm compatibility with RMS-54/1706 hardware and help you select the right rocket airframe.
    AeroTech K805G-PS RMS-54/1706 Reload Kit (1 Pack) - 11805P
    AeroTech K805G-PS RMS-54/1706 Reload Kit (1 Pack) - 11805P
  • AeroTech K805G-PS RMS-54/1706 Reload Kit (1 Pack) - 11805P: Total impulse: 1762 N-sec; average thrust: 805 newtons; peak thrust: 828.2 N; thrust duration: 2.2 seconds. These performance figures help you estimate rocket acceleration and altitude, and ensure your rocket can handle the thrust.
  • AeroTech K805G-PS RMS-54/1706 Reload Kit (1 Pack) - 11805P: This is a Plugged/Smoke motor reload. Plugged motors must be used with a timer, altimeter, or radio-activated recovery system. Because there is no built-in ejection charge, you must provide an alternative recovery deployment method.
  • AeroTech K805G-PS RMS-54/1706 Reload Kit (1 Pack) - 11805P: Requires Level 2 High-Power certification through NAR or Tripoli to purchase. Proof of age (18+) and certification must be provided. This is a legal requirement. The kit cannot be shipped without verification of age and certification level.

Safety and Compatibility Notes

High Power RMS reload kits are not compatible with Mid Power RMS products. Always use the correct hardware set (RMS-54/1706) for this reload. The motor requires HAZMAT shipping via UPS or FedEx. The manufacturer does not list recommended maximum lift-off weights for high-power motors, so use simulation software like RockSim or OpenRocket to determine safe weights for your rocket. The K805G-PS is certified by TRA, NAR, and CAR.

Related Articles

Customer Service
Home
Products
Cart
Profile