What the Mantis Deluxe Launch Pad Offers
The Enerjet by AeroTech Mantis Deluxe Launch Pad is built to handle A through G size model and mid-power rockets. Its rugged aluminum legs slide out for stability and slide in for storage, making it a practical choice for field use. The pad rotates a full 360 degrees and allows launch angle adjustments up to 15 degrees from vertical, giving you flexibility in varying wind conditions or launch site layouts.
Product Facts for the Mantis Deluxe Launch Pad
- Enerjet by AeroTech Mantis™ Deluxe Launch Pad - 89281: Accommodates 1/8", 3/16", and 1/4" launch rods. You can use the same pad for different rocket sizes without buying separate hardware.

Enerjet by AeroTech Mantis™ Deluxe Launch Pad - 89281 - Enerjet by AeroTech Mantis™ Deluxe Launch Pad - 89281: Loaded rocket is positioned 24 inches above the ground. This clearance keeps the blast away from the ground and reduces debris kickback during launch.
- Enerjet by AeroTech Mantis™ Deluxe Launch Pad - 89281: Swing-arm lowers the launch rod to a horizontal position for safe prep. You can load the rocket at eye level without reaching over the blast area.
- Enerjet by AeroTech Mantis™ Deluxe Launch Pad - 89281: Rotates 360 degrees and adjusts launch angle up to 15 degrees from vertical. You can aim away from obstacles or compensate for light wind without moving the entire pad.
Assembly Steps for the Mantis Launch Pad
Assembly requires a blade head screwdriver and liquid plastic cement (not included). Have these tools ready before you start.
- Slide out the aluminum legs: Extend each leg until it locks into place. The legs slide in for easy storage after use.
- Attach the blast deflector: Use the supplied metal blast deflector and rocket stand-off. Secure them with the screwdriver and liquid plastic cement as needed.
- Assemble the two-piece launch rod: The 1/4" launch rod comes in two sections that join to form a 4.75-foot rod. For 1/8" or 3/16" rods, use your own compatible rod.
- Install the launch rod into the pad: Insert the rod through the guide and into the base. The swing-arm allows you to lower the rod horizontally for easy rocket loading.
- Set the launch angle: Dial in up to 15 degrees from vertical using the angle adjustment. Rotate the pad 360 degrees to align with your launch site.
- Load the rocket: With the rod horizontal, place your rocket onto the rod. Raise the swing-arm to vertical, positioning the rocket 24 inches above the ground.
Launch Preparation and Safety
Before launch, ensure the pad is on level ground and the legs are fully extended for stability. The blast deflector should be clean and positioned to direct exhaust away from the ground. Always follow your rocket motor's instructions for safe ignition distance. The swing-arm design makes it easy to load the rocket without reaching over the pad, reducing the risk of accidental ignition during setup.
What You'll Need That's Not Included
The Mantis Deluxe Launch Pad does not come with a screwdriver, liquid plastic cement, rocket, or 1/8" and 3/16" diameter launch rods. Plan ahead to have these items on hand for assembly and first use.


