Back to Blog
How-to Guides 2026-11-15 Quest Q-jet 1 views

AeroTech RMS-24/40 Hardware Set: Parts, Fit and First Reload

AeroTech RMS-24/40 Hardware Set: Parts, Fit and First Reload

Learn what the AeroTech RMS-24/40 hardware set includes, how the case and closures fit together, and what to check before your first 24mm reload.

What the RMS-24/40 hardware set actually is

The AeroTech RMS-24/40 Complete Motor Hardware Set (part 91241) is the reusable metal hardware that accepts AeroTech RMS-24/40 reload kits. It is not a motor on its own—reloads are sold separately—and it is a mid-power component, not a high-power one. The set includes the aluminum motor case, forward closure, aft closure, and a 1cc tube of Super-Lube grease for assembly.

This guide walks through the parts, how they go together for a first reload, and the compatibility check that matters most before you buy or build.

RMS-24/40 parts list at a glance

The compatibility check that matters most

AeroTech states clearly: Mid Power RMS reload kits are not compatible with High Power RMS products. The RMS-24/40 is a mid-power system, so use only RMS-24/40 reloads with this hardware. Do not substitute a high-power reload or mix hardware across RMS sizes.

The supplied information does not list specific reload designations beyond the RMS-24/40 family, so check the reload packaging or AeroTech documentation to confirm the exact reload you intend to fly is an RMS-24/40 kit.

First reload: a practical assembly sequence

The catalog does not include a step-by-step assembly manual. The sequence below follows the hardware components and the supplied note about the included grease; always defer to the reload kit instructions for torque, lubrication points, and ignition details.

  1. Confirm the reload is RMS-24/40: Check the reload kit label. It must be an AeroTech RMS-24/40 reload. High Power RMS reloads are not compatible with this mid-power hardware.
  2. Lay out the four supplied pieces: Motor case, forward closure, aft closure, and the 1cc Super-Lube grease tube. Have the reload kit and its instructions on the bench.
  3. Apply grease where the reload instructions specify: The set includes Super-Lube for assembly. Use it only at the points called out in the reload kit instructions; the supplied information does not list those points.
  4. Assemble case and closures per the reload instructions: The forward and aft closures seal the case. Follow the reload kit's order and any torque values it gives—do not guess.
  5. Install the reload and ignition hardware: The reload kit supplies the propellant grains, delay, and ejection charge. Follow its instructions for loading and for the igniter.
  6. Inspect before flight: Check that closures are fully seated and the case is clean. The supplied information does not include a preflight checklist, so use the reload kit's guidance.

What the set does not include

The hardware set is exactly that—hardware. It does not include a reload kit, igniter, or ejection charge; those come with the reload. It also does not include a motor mount or airframe; those are part of your rocket. The 1cc grease tube is for assembly lubrication, not for general airframe building.

Because this is a clearance item, availability is limited to stock on hand. If you are standardizing on the RMS-24/40 system, confirm the hardware is in stock before planning a build around it.

Price and availability note

Where the supplied information stops

The catalog record does not include motor dimensions, weight, maximum liftoff weight, or a complete assembly manual. It also does not state which specific reload kits are currently available. For those details, consult the reload kit packaging and AeroTech's published documentation. Use this guide to understand the hardware and the compatibility boundary; use the reload instructions for the assembly steps themselves.

Related Articles

Customer Service
Home
Products
Cart
Profile