What You Need Before Starting
The AeroTech K780R-PS is a 75mm high-power reload kit that you assemble yourself. Before you begin, make sure you have the AeroTech RMS-75/2560 motor hardware, which is sold separately. This hardware includes the aluminum casing and other components needed to complete the motor. The reload kit itself contains all internal motor components and FirstFire™ Initiators, so you won't need to source those separately.
Because this is a plugged reload, there is no motor-actuated delay or ejection charge. You'll need a timer, altimeter, or radio-activated recovery system for deployment. Plan your recovery setup before assembly so you're ready to fly once the motor is built.
Assembly Steps for the K780R-PS
Follow these steps to assemble your K780R-PS reload kit. Always work in a clean area and follow all safety guidelines for high-power rocketry.
- Install the forward seal disc: This motor requires installing a forward seal disc (75FSD) during assembly. Make sure it is properly seated to ensure a safe and reliable motor.
- Assemble the motor with RMS-75/2560 hardware: Use the AeroTech RMS-75/2560 motor hardware to build the motor. This hardware is available as a complete set or as individual parts. Follow the manufacturer's instructions for your specific hardware components.
- Insert the propellant and initiator: The reload kit includes the propellant grain and FirstFire™ Initiator. Install them according to the instructions included with the reload kit and hardware.
- Verify compatibility: High Power RMS reload kits are not compatible with Mid Power RMS products. Double-check that your hardware is the correct RMS-75/2560 type before assembly.
Safety and Certification Requirements
The K780R-PS is a High-Power motor that requires Level 2 High-Power certification through NAR or Tripoli to purchase and use. Federal law prohibits the sale of this motor to persons under 18 years of age. When you order, be prepared to provide proof of age and Level 2 certification, as the store will not ship until these are verified.
This motor also requires HAZMAT shipping via UPS or FedEx, so factor in additional shipping time and cost. Always follow local regulations and club safety codes when launching high-power rockets.
Key Specifications and Facts
- AeroTech K780R-PS RMS-75/2560 Reload Kit (1 Pack) - 11780P: Motor Diameter: 2.965 inches (75mm); Casing Length: 15.59 inches (396mm); Propellant Weight: 1268 grams; Motor Weight: 2701 grams. These dimensions help you confirm that your rocket's motor mount and overall design can accommodate this 75mm motor.

AeroTech K780R-PS RMS-75/2560 Reload Kit (1 Pack) - 11780P - AeroTech K780R-PS RMS-75/2560 Reload Kit (1 Pack) - 11780P: Total Impulse: 2360 N-sec; Average Thrust: 780 newtons; Peak Thrust: 979 N-sec; Thrust Duration: 2.9 seconds. Use these performance numbers to run simulations and verify that your rocket can handle the thrust and impulse.
- AeroTech K780R-PS RMS-75/2560 Reload Kit (1 Pack) - 11780P: This is a Plugged/Smoke motor reload that utilizes Redline™ propellant, producing a visible scarlet flame. The plugged design means you need an electronic recovery deployment system, and the smoke trail helps with tracking.
Compatibility and Limitations
Remember that this reload kit is not compatible with Mid Power RMS products, and it requires the specific RMS-75/2560 hardware. The supplied information does not list recommended maximum lift-off weights for this motor, so you'll need to use simulation software like RockSim or OpenRocket to verify your rocket's stability and performance.
Also, note that the catalog does not provide detailed assembly steps beyond the forward seal disc requirement and the need for proper hardware. Always refer to the official AeroTech instructions that come with your hardware and reload kit for the most accurate and safe assembly procedure.


