Blog

AeroTech M1297W-PS Reload Kit: 75mm Motor Prep Steps

Step-by-step prep for the AeroTech M1297W-PS RMS-75/5120 reload kit, including hardware checks, forward seal disc installation, and flight-day verific...

Enerjet F52-8C 2-Motor Pack: Specs and Flight Prep

A practical guide to the Enerjet by AeroTech F52-8C 2-Motor Pack: what the specs mean, how to prep a 24mm composite motor, and when to choose this pac...

AeroTech RMS Motor Hardware Sets: 29mm vs 38mm vs 54mm

Compare AeroTech RMS hardware sets by case size, reload compatibility, and closure needs. Decide between 29mm, 38mm, and 54mm before you buy.

Quest Water Rocket Nozzle Care: Keep Launches Consistent

Stop inconsistent water rocket launches by caring for the Q7321 nozzle. Learn the symptoms, causes, and when to replace your Quest water rocket nozzle...

AeroTech RMS-29/40-120 Motor Case: Reloads and Setup

Learn how to set up the AeroTech RMS-29/40-120 motor case and load compatible reload kits like the G53-7FJ and G77R-14A. Includes step-by-step assembl...

Quest Q-Jet B6-4W 2-Motor Launch Pack: FAQ for Flyers

Straight answers on the Q6123 2-motor pack: what the B6-4W delivers, which rockets it fits, and when to pick it over the A3-6FJ pack.

Model Rocket Delay Kit Guide: HDK-11 and CRDK38-06 Explained

Match your delay kit to the exact RMS motor before you buy. This guide explains HDK-11 and CRDK38-06 fit, delay grain counts, and compatibility rules.

Why Your Rocket Nose Cone Fits Loose and How to Fix It

A loose nose cone is usually a diameter mismatch, not a defect. Here's how to diagnose the gap and choose the right fix for 20mm, 40mm, and 2.6-inch a...

RMS-54/2560 vs RMS-38 Reload Kits: Which AeroTech System to Buy

Compare AeroTech RMS-54/2560 and RMS-38 reload kits on hardware, reload cost, and delay adjustment to choose the right high power system for your flig...

How to Install a Motor Locking Ring in Your Rocket Kit

A step-by-step guide to installing the Q20024 motor locking ring in Quest Q-jet motor systems, including the mistakes that cause loose motors and fail...