Quest Q-jet

AeroTech F35-5W RMS-24/60 再裝填套件(2入)- 63505

AeroTech F35-5W RMS-24/60 再裝填套件(2入)- 63505 - Main image
$27.51 $42.99 In stock

AeroTech RMS 可重複裝填馬達系統是一款鋁殼可重複使用馬達,以套件形式提供,由使用者自行組裝。您需要 AeroTech RMS-24/60 馬達硬體來建構並完成馬達,以實現多次可靠的飛行。馬達硬體可單獨以完整套組或個別零件形式購買。重要:中功率 RMS 重裝套件與高功率 RMS 產品不相容。此 RMS 馬達重裝套件採用 RCS 獨家 White Lightning™ 航太級複合推進劑配方,能在升空時產生絢麗的亮白色火焰、濃密的白煙以及低沉的轟鳴聲。

AeroTech 馬達重裝套件包含 2 個火箭馬達重裝組。重裝套件包含所有內部馬達零件及 FirstFire™ 點火器。此 AeroTech 馬達可在美國境內郵寄,無需危險品運費!聯邦法律目前禁止將此高功率馬達出售給未滿 18 歲的人士。包含此商品的訂單在收到年齡證明(例如駕照影本)之前將不會出貨。

經 Tripoli 火箭協會 (TRA)、美國火箭協會 (NAR) 和加拿大火箭協會 (CAR) 認證。

  • 規格參數:

    馬達直徑:0.938 英吋 (24mm)

    外殼長度:3.75 英吋 (95mm)

    所需硬體:RMS-24/60

    總衝量:57.1 N-sec

    平均推力:34.9 牛頓

    峰值推力:55.2 N-sec

    推力持續時間:1.6 秒

    延遲時間:5 秒

    推進劑重量:30 公克

    馬達重量:84 公克

    最大起飛重量:由於涉及變數眾多,AeroTech/Quest 目前未列出或公布其中功率和高功率火箭馬達的建議最大起飛重量。我們建議改用 www.apogeerockets.com 提供的 RockSim 軟體或 www.openrocket.info 提供的 OpenRocket Simulator。

付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.6 / 5 · 5 reviews)

Jacob ★★★★★

Took me about twenty minutes to build the motor with the RMS-24/60 hardware, and the fit of the aluminum case and closures was spot on. Both reloads lit clean and consistent, no issues with the delay grain either.

Alexander ★★★★★

First time assembling one of these and the fit into my 24/60 case was tight and clean, no sanding needed. Two packs means I get four flights out of one order, which is way better than buying single-use motors every launch.

Amelia ★★★★★

Finally got my hands on these after a long backorder and they did not disappoint—the aluminum casing reloads slid right into my RMS-24/60 hardware with no fuss, and both motors burned with a clean, consistent thrust curve. Assembly took me about ten minutes per reload, which feels efficient for the