Quest Q-jet

AeroTech G25W-10A RMS-29/120 再裝填套件(1 包) - 072510

AeroTech G25W-10A RMS-29/120 再裝填套件(1 包) - 072510 - Main image
$22.04 $34.99 In stock

AeroTech 可重複使用馬達系統 RMS 是一款鋁殼可重複使用馬達,以套件形式提供,由使用者自行組裝。您需要 AeroTech RMS-29/120 馬達硬體來建構並完成馬達,以實現多次可靠的飛行。馬達硬體可單獨以完整套組或個別零件形式購買。重要:高功率 RMS 重新裝填套件與中功率 RMS 產品不相容。您需要使用 18-38mm 延遲鑽孔工具 (RDDT) 設定所需的延遲時間,該工具未隨附。18-38mm 延遲鑽孔工具 (RDDT) 可在本網站的 AeroTech 配件區購買。

此 RMS 馬達填充套件採用 RCS 獨家的 White Lightning™ 航太級複合推進劑配方,能產生絢麗的亮白色火焰、大量濃密白煙,並在升空時發出低沉轟鳴聲。

AeroTech 馬達重新裝填套件內含 1 火箭馬達重新裝填。重新裝填套件包含所有內部馬達元件和 FirstFire™ 點火器。需透過 UPS 或 FEDEX 進行 HAZMAT 運送。聯邦法律目前禁止將此高功率馬達出售給未滿 18 歲的人士。包含此商品的訂單在收到年齡證明(例如駕照影本)之前將不會出貨。

經 Tripoli 火箭協會 (TRA)、美國火箭協會 (NAR) 和加拿大火箭協會 (CAR) 認證。

  • 規格參數:

    馬達直徑:1.125 英吋 (29mm)

    外殼長度:5.5 英吋 (140mm)

    所需硬體:RMS-29/120

    總衝量:120 N-sec

    平均推力:22.2 牛頓

    峰值推力:49 N-sec

    推力持續時間:4.5 秒

    延遲時間:可調整至多 10 秒

    推進劑重量:62.5 公克

    馬達重量:168 公克

    最大起飛重量:由於涉及變數眾多,AeroTech/Quest 目前未列出或公布其中功率和高功率火箭馬達的建議最大起飛重量。我們建議改用 www.apogeerockets.com 提供的 RockSim 軟體或 www.openrocket.info 提供的 OpenRocket Simulator。

付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (5.0 / 5 · 5 reviews)

Madison ★★★★★

The aluminum casing feels solid and the fit in my RMS-29/120 hardware was spot on. Took me about fifteen minutes to assemble the grains and liner, and the seal held perfectly on the first flight.

Charlotte ★★★★★

Assembled this in my 29/120 case and the fit was spot on, no trimming or fiddling needed. The grains seated cleanly and it lit first try, which is more than I can say for some kits I've tried.

Elizabeth ★★★★★

The reload kit packed tight and everything seated cleanly into the RMS-29/120 casing without needing extra force. Assembled my first motor in about fifteen minutes following the standard steps, and the fit of the aluminum hardware felt precise. Happy with how straightforward this one was.