Quest Q-jet

AeroTech I599N-P RMS-54/426 再裝填套件(1入)- 09599P

AeroTech I599N-P RMS-54/426 再裝填套件(1入)- 09599P - Main image
$61.63 $91.99 In stock

AeroTech 可重複使用引擎系統 RMS 是一款鋁殼可重複使用引擎套件,需由使用者自行組裝。您需要 AeroTech RMS-54/426 引擎硬體來建構並完成引擎,以實現多次可靠的飛行。引擎硬體可單獨以完整套組或個別零件形式購買。此引擎在組裝時需要安裝一個 54mm 小型噴嘴後端閉合裝置 (54ACCSN)。重要:高功率 RMS 重新裝填套件與中功率 RMS 產品不相容。

I599N-P 是 Plugged 引擎重新裝填套件。Plugged 重新裝填套件不使用引擎驅動的延遲或彈出裝置。Plugged 引擎必須搭配計時器、高度計或無線啟動回收系統使用。

此 RMS 馬達重裝套件採用 RCS 獨家的 Warp-9™ 航太級複合推進劑配方,能產生帶有「馬赫鑽石」的顯著黃橙色火焰。Warp-9 是 AeroTech 燃燒最快的推進劑。最初為 Orbital 的 Pegasus® 尾翼馬達開發,Warp-9 非常適合在特定馬達尺寸下需要最高推力的情況。

AeroTech 馬達重填套件包含 1 個火箭馬達重填組。重填套件包含所有內部馬達零件和 FirstFire™ 點火器。需透過 UPS 或 FEDEX 進行危險品運送。聯邦法律目前禁止將此高功率馬達銷售給未滿 18 歲的人士。這是一款高功率馬達,需具備經由 NAR 或 Tripoli 認證的 Level 1 高功率證書才能購買。包含此商品的訂單將在收到年齡證明(例如駕照影本)和 Level 1 證書證明後才會出貨。

經 Tripoli 火箭協會 (TRA)、美國火箭協會 (NAR) 和加拿大火箭協會 (CAR) 認證。

  • 規格參數:

    引擎直徑:2.125 英吋 (54mm)

    外殼長度:6.14 英吋 (156mm)

    所需硬體:RMS-54/426

    總衝量:410 N-sec

    平均推力:667.8 牛頓

    峰值推力:743 N-sec

    推力持續時間:0.7 秒

    延遲時間:Plugged

    燃料重量:186 公克

    引擎重量:505 公克

    最大起飛重量:由於涉及變數,AeroTech/Quest 目前未列出或發布其中等功率及高功率火箭的建議最大起飛重量。

    相反,我們建議使用 www.apogeerockets.com 提供的 RockSim 軟體或 www.openrocket.info 提供的 OpenRocket 模擬器。

付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (5.0 / 5 · 5 reviews)

Matthew Q. ★★★★★

The aluminum casing on this reload kit feels solid and precisely machined—no burrs or rough edges. Assembly was straightforward following the instructions, and the 54mm grain lit off clean without any hang-fire. Feels like good value given these are reusable and you just replace the propellant.

Violet ★★★★★

I've been using the RMS-54/426 reload kit for a few launches now, and the aluminum casing really holds up well after assembly. The instructions were clear enough that I had it put together in about half an hour, which was faster than I expected for a first-timer.

Joshua ★★★★★

Took about twenty minutes to assemble everything with the aluminum casing from my existing hardware, and the fit was snug but not frustrating. The reload kit itself is well packaged, no bent fins or crushed delays. Already burned through one pack and the motor performed exactly as expected for my L1