Quest Q-jet

AeroTech F35-11W RMS-24/60 重新裝填套組(2入) - 63511

AeroTech F35-11W RMS-24/60 重新裝填套組(2入) - 63511 - Main image
$27.08 $42.99 In stock

AeroTech RMS 可重複裝填馬達系統是一款鋁殼可重複使用馬達,以套件形式提供,由使用者自行組裝。您需要 AeroTech RMS-24/60 馬達硬體來建構並完成馬達,以實現多次可靠的飛行。馬達硬體可單獨以完整套組或個別零件形式購買。重要:中功率 RMS 重裝套件與高功率 RMS 產品不相容。此 RMS 馬達重裝套件採用 RCS 獨家 White Lightning™ 航太級複合推進劑配方,能在升空時產生絢麗的亮白色火焰、濃密的白煙以及低沉的轟鳴聲。

AeroTech 馬達重裝套件包含 2 個火箭馬達重裝組。重裝套件包含所有內部馬達零件及 FirstFire™ 點火器。此 AeroTech 馬達可在美國境內郵寄,無需危險品運費!聯邦法律目前禁止將此高功率馬達出售給未滿 18 歲的人士。包含此商品的訂單在收到年齡證明(例如駕照影本)之前將不會出貨。

經 Tripoli 火箭協會 (TRA)、美國火箭協會 (NAR) 和加拿大火箭協會 (CAR) 認證。

  • 規格參數:

    馬達直徑: 0.938 英吋 (24 公釐)

    外殼長度: 3.75 英吋 (95 公釐)

    所需硬體: RMS-24/60

    總衝量: 57.1 牛頓-秒

    平均推力: 34.9 牛頓

    峰值推力: 55.2 牛頓-秒

    推力持續時間: 1.6 秒

    延遲時間: 11 秒

    推進劑重量: 30 公克

    馬達重量: 85 公克

    最大起飛重量:由於涉及變數眾多,AeroTech/Quest 目前未列出或公布其中功率和高功率火箭馬達的建議最大起飛重量。我們建議改用 www.apogeerockets.com 提供的 RockSim 軟體或 www.openrocket.info 提供的 OpenRocket Simulator。

付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.5 / 5 · 4 reviews)

Kevin ★★★★★

Built my first reloadable motor with this kit and the snap ring fit was perfect — no prying or struggling. The two-pack makes it easy to practice assembly before a launch day.

Jacob T. ★★★★★

Just finished my second flight with these and the consistency between the two reloads is impressive — both burned exactly the same. The aluminum casing threads together smoothly without any binding, which makes assembly on the launch pad much easier than I expected.

Riley M. ★★★★☆

The reload kit assembles smoothly once you've done it before, though the first time required close attention to the instructions. Burn time feels consistent across both motors, which is exactly what I wanted for testing altimeters.