Quest Q-jet

AeroTech L1940X-PS RMS-75/3840 再裝填套件(1入)- 12194P

AeroTech L1940X-PS RMS-75/3840 再裝填套件(1入)- 12194P - Main image
$208 $340.99 In stock

AeroTech 可重複裝填馬達系統 RMS 是一款鋁製外殼的可重複使用馬達,以套件形式提供,由使用者自行組裝。您需要 AeroTech RMS-75/3840 馬達硬體來組裝並完成馬達,以進行多次可靠的飛行。馬達硬體可單獨以完整套組購買,也可作為個別零件購買。此馬達在組裝時需要安裝一個不鏽鋼前密封盤(75FSDSS)。重要:高功率 RMS 重裝套件與中功率 RMS 產品不相容。

L1940X-PS 是一款 Plugged/Smoke 馬達重裝套件。Plugged 重裝套件不使用馬達驅動的延遲或拋射藥。Plugged 馬達必須與計時器、高度計或無線電啟動的回收系統搭配使用。

此 RMS 馬達再填充使用 RCS 獨家航太級複合推進劑 Propellant X™,這是一種高 ISP 推進劑,會產生明亮的白色火焰和適量的煙霧。

AeroTech 引擎重新裝載套組包含 1 個火箭引擎重新裝載。重新裝載套組包含所有內部引擎元件和 FirstFire™ 點火器。需要透過 UPS 或 FEDEX 進行危險品運送。根據聯邦法律,目前禁止將此高功率引擎出售給未滿 18 歲的人士。這是一個高功率引擎,需要透過 NAR 或 Tripoli 取得第 2 級高功率認證才能購買。包含此商品的訂單在收到年齡證明(例如駕照影本)和第 2 級認證證明之前,將不會出貨。

經 Tripoli 火箭協會 (TRA)、美國火箭協會 (NAR) 和加拿大火箭協會 (CAR) 認證。

  • 規格參數:

    馬達直徑:2.965 英吋(75 公釐)

    外殼長度:20.90 英吋(531 公釐)

    所需硬體:RMS-75/3840

    總衝量:4329 牛頓-秒

    平均推力:1939.3 牛頓

    峰值推力:2319 牛頓-秒

    推力持續時間:2.2 秒

    延遲時間:Plugged 含煙霧

    推進劑重量:1825 公克

    馬達重量:3856 公克

    最大起飛重量:由於涉及變數眾多,AeroTech/Quest 目前未列出或公布其中功率和高功率火箭馬達的建議最大起飛重量。我們建議改用 www.apogeerockets.com 提供的 RockSim 軟體或 www.openrocket.info 提供的 OpenRocket Simulator。

付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.8 / 5 · 4 reviews)

Emma G. ★★★★★

Right on the money for myL3 flight—the reload slipped together cleanly and the delay grains were spot on. No fiddling during assembly, and the thrust curve felt exactly as advertised.

Amelia ★★★★★

Flew this reload in my L3 cert bird and the aluminum casing held up perfectly with no signs of wear. It packed a solid burn and the delay was spot on for my 4-inch rocket.

Natalie A. ★★★★★

Assembling this reload kit took about 20 minutes with the included instructions, and the aluminum casing fit my existing hardware perfectly with no fiddling. The propellant grains slid in clean and the O-rings sealed tight on the first flight, which gave me a solid, consistent burn every time.