Quest Q-jet

AeroTech K750ST-PS RMS-75/1280 重新裝填套件 (1 包) - 11750P

AeroTech K750ST-PS RMS-75/1280 重新裝填套件 (1 包) - 11750P - Main image
$124.79 $194.99 In stock

AeroTech 可重裝馬達系統 RMS 是一款鋁製外殼可重複使用的馬達套件,由使用者自行組裝。您需要 AeroTech RMS-75/1280 馬達硬體來組裝並完成馬達,以進行多次可靠的飛行。馬達硬體可另行購買,提供完整套組及單獨零件。此馬達在組裝時需安裝前密封盤(75FSD)。重要事項:高功率 RMS 重裝套件與中功率 RMS 產品不相容。

K750ST-PS 是一款堵塞式/煙霧馬達重裝套件。堵塞式重裝套件不使用馬達驅動的延遲或拋射藥。堵塞式馬達必須搭配計時器、高度計或無線電啟動的回收系統使用。

此 RMS 馬達重裝套件採用 RCS 獨家 Super Thunder™ 航太級複合推進劑配方,可產生明亮的藍紫色火焰,且排煙量極少。Super Thunder™ 馬達提供比 Blue Thunder™ 更高的比衝。

AeroTech 馬達重裝套件內含 1 火箭馬達重裝。重裝套件包含所有內部馬達零件及 FirstFire™ 點火器。需透過 UPS 或 FEDEX 進行危險品運送。聯邦法律目前禁止將此高功率馬達銷售給未滿 18 歲的人士。此為高功率馬達,購買需具備 NAR 或 Tripoli 的 Level 2 高功率認證。包含此商品的訂單在收到年齡證明(例如駕照影本)及 Level 2 認證證明之前,將不會出貨。 

已通過 Tripoli 火箭協會(TRA)及美國國家火箭協會(NAR)認證。

  • 規格參數:

    馬達直徑:2.95 英吋(75 公釐)

    外殼長度:10.5 英吋(266.7 公釐)

    所需硬體:RMS-75/1280

    總衝量:1299 牛頓-秒

    峰值推力:836 牛頓-秒

    延遲時間:堵塞式含煙霧

    推進劑重量:595 公克

    馬達重量:1812 公克

    最大起飛重量:由於涉及多種變數,AeroTech/Quest 目前未針對中功率及高功率火箭馬達列出或公布建議的最大起飛重量。我們建議改用 www.apogeerockets.com 提供的 RockSim 軟體或 www.openrocket.info 提供的 OpenRocket Simulator。

付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (5.0 / 5 · 5 reviews)

Madison ★★★★★

The aluminum casing on this reload feels solid and machined well, and it seated into my RMS-75/1280 hardware without any fiddling. Cleaned up nicely after the flight too, so I'll definitely be reusing it.

Mia ★★★★★

Assembling this reload kit took me about twenty minutes the first time, and now I can swap in a fresh grain before every launch day. The reusable aluminum case means I'm not tossing hardware after each flight, which pays for itself fast.

William ★★★★★

The aluminum casing feels solid and it cleaned up way easier than the single-use motors I used to buy. Assembly took me about half an hour the first time, but the instructions were clear enough that I got it right without help.