Voltar ao blog
Dicas e Cuidados 2026-11-16 Quest Q-jet 0 visualizações

AeroTech HDK-08 Delay Kit: When to Swap Your RMS-24/40 Delay

AeroTech HDK-08 Delay Kit: When to Swap Your RMS-24/40 Delay

Use the AeroTech HDK-08 hobby delay kit to change ejection timing in D9-4W and F39-6T reloads. Here is when a swap makes sense and what the kit does not include.

The delay you get is not always the delay you need

An RMS-24/40 reload kit comes with a delay element already set for a specific burn time. If your rocket is lighter or heavier than the typical build, or if you want the ejection charge to fire at a different point after apogee, the factory delay may not match your flight. The AeroTech HDK-08 hobby delay kit gives you three replacement delay elements and spacers so you can change that timing without buying a whole new reload.

This guide covers when a delay swap is worth doing, what the HDK-08 actually contains, and the compatibility limits you need to check before you open the package.

What the HDK-08 is built for

When swapping the delay makes sense

Swap the delay when your rocket’s weight or drag profile puts the factory delay too early or too late for a safe deployment. A delay that fires too soon can separate the rocket while it is still moving fast; one that fires too late can let the rocket fall nose-first before the parachute opens. The HDK-08 lets you move the ejection point without changing the motor itself.

It is also useful if you want to standardize on one reload for several rockets and tune the delay per airframe. Keep in mind that the supplied information does not include a delay adjustment chart or a recommended delay for specific rocket weights, so you will need to rely on your own flight data or a rocketry simulation tool to choose the right element.

What the kit includes and what it does not

  • Included: Three delay elements and spacers. These are the parts you swap to change ejection timing.
  • Not included: Motor delay O-rings, delay insulators, and other small parts. The catalog states these are supplied with the RMS reload kits, so do not discard them when you open a reload.
  • Not interchangeable: Hobby Delay Kits and High Power Delay Kits are not interchangeable. The HDK-08 is a hobby delay kit for the D9-4W and F39-6T; do not substitute a high power delay kit.

Compatibility check before you buy

Confirm that your reload is a D9-4W (40904) or F39-6T (63906). The HDK-08 is not listed for other RMS-24/40 reloads in the supplied catalog, so using it with a different reload is not supported by the available information. Also check that you have the RMS-24/40 hardware set; the delay kit alone will not let you fly.

The kit is certified by the Tripoli Rocketry Association (TRA), the National Association of Rocketry (NAR), and the Canadian Association of Rocketry (CAR), which means it meets the certification requirements for those organizations when used as intended.

Shipping and age requirements

The AeroTech HDK-08 is U.S. mailable with no hazmat fee, which makes it easier to order alongside other small parts. However, orders containing this item will not ship until proof of age (such as a copy of a driver’s license) is received. The catalog also notes that the sale of this high power motor to persons under 18 years of age is currently prohibited by federal law. Plan for that verification step so your build schedule does not stall.

A realistic look at the HDK-08

The HDK-08 is a focused accessory: it solves the problem of a fixed delay that does not match your rocket, but only for two specific reloads. It does not include the O-rings or insulators that come with reload kits, and it is not a substitute for high power delay kits. If you fly D9-4W or F39-6T reloads and want to tune ejection timing, the 3-pack gives you enough elements to experiment and refine. If you fly other reloads, check the catalog for a delay kit that matches your motor before ordering.

Artigos relacionados

Customer Service
Início
Produtos
Carrinho
Perfil