Quest Q-jet

AeroTech H14ST-P 29mm x 230mm 単回使用 DMS 1 モーターキット - 081400

AeroTech H14ST-P 29mm x 230mm 単回使用 DMS 1 モーターキット - 081400 - Main image
$51.82 $70.99 In stock

AeroTech Disposable Motor System DMSは、ユーザーが組み立てるキット形式の使い捨てモーターです。すべてのAerotech DMSモーターは、完全に使い捨て可能なコンポーネントを使用しています。ノズルと推進薬はすでに取り付けられています。

H14ST-Pは、Plugged/Smokeモーターです。Pluggedリロードキットは、モーター作動式の排出チャージを使用しません。Pluggedモーターは、タイマー、高度計、または無線起動式の回収システムと併用する必要があります。 モーターケースにはスラストリングが含まれています。

DMSモーターは、フィラメントワウンドグラスファイバーケーシング、ガラス強化コンポジットフェノールノズル、成形プラスチック隔壁、およびRCS独自のSuper Thunder™航空宇宙グレードコンポジット推進薬配合を採用しており、明るい青紫色の炎と最小限の排気煙を生成します。Super Thunder™モーターは、Blue Thunder™よりも高いISPを提供します。

このAeroTechモーターパックには、1基のロケットモーターと1個のFirstFire™イニシエーターが含まれています。UPSまたはFEDEXによる危険物輸送が必要です。このハイパワーモーターの18歳未満の者への販売は、連邦法により現在禁止されています。これはハイパワーモーターであり、購入にはNARまたはTripoliを通じたレベル1のハイパワー認定が必要です。この商品を含む注文は、年齢証明(運転免許証のコピーなど)およびレベル1認定の証明が受理されるまで発送されません。

Tripoli Rocketry Association(TRA)、National Association of Rocketry(NAR)、Canadian Association of Rocketry(CAR)によって認定されています。

  • 仕様:

    モーター直径: 1.13 インチ (29 mm)

    ケーシング長さ: 9.06 インチ (230 mm)

    総インパルス: 265 N-sec

    燃焼時間: 18.3 秒

    ピーク推力: 47.6 N-sec

    遅延時間: Plugged

    推進薬重量: 134.1 グラム

    装填時重量: 230 グラム

    最大離陸重量:関連する変数のため、AeroTech/Questは現在、ミッドパワーおよびハイパワーロケットモーターの推奨最大離陸重量を記載または公開していません。代わりに、www.apogeerockets.com で入手可能なRockSimソフトウェア、または www.openrocket.info で入手可能なOpenRocket Simulatorの使用をお勧めします。

お支払い前の確認

利用可能な支払方法と最終金額は購入手続きで表示されます。

発送までの時間

注文の処理時間と配送時間の両方を見込んでください。

Standard Shipping: 出荷準備(営業日) 0–1; 輸送(営業日) 7–15.

Express Shipping: 出荷準備(営業日) 0–1; 輸送(営業日) 7–15.

規定を見る
返金が必要なとき

返金については注文番号を添えて店舗にお問い合わせください。

返送前に返金処理期間をご確認ください。

規定を見る
配送料金

お届け先と選択した配送方法の料金をご確認ください。

Standard Shipping · アメリカ合衆国: $0.00

Express Shipping · アメリカ合衆国: $3.99

規定を見る
返品前の確認

返送する前に適用される返品条件をご確認ください。

アメリカ合衆国 · 返品期限(受取後の日数): 30. 返品方法: 郵送. 返品送料: 販売者負担.

規定を見る

Customer Reviews (4.8 / 5 · 5 reviews)

Aurora S. ★★★★★

Assembling the kit took me about ten minutes and the instructions were easy enough to follow. The disposable nozzle and casing mean I don't have to clean anything afterward, which is honestly my favorite part. Flew straight and stable on the first try.

Grace M. ★★★★★

The single-use design is what sold me — no cleanup, no casing to chase down after the flight. Assembly took about ten minutes and the nozzle seated cleanly on the first try. Flew it in my 29mm build and the burn was smooth the whole way up.

Evelyn U. ★★★★★

The single-use design is what sold me — no casing to recover or clean afterward, which is huge when you're launching in a field with limited time. Fit was snug and everything seated without any wobble. Flew it twice now and both times it performed exactly as expected.