What the E26-10W Launch Pack Gives You
The Quest Q-Jet E26-10W White Lightning Complete 2-Motor Launch Pack (Q6144) is a two-motor pack built around Quest's 24mm composite propellant. Each motor is a single-use unit, and the pack includes the FirstFire Micro Initiators and bright orange Parachute Recovery Wadding you need for launch day. At a catalog price of USD 16.19 (compared with USD 22.49), it's a straightforward way to try White Lightning propellant without buying a larger bulk pack.
The E26-10W is a 24mm motor with a 10-second delay. Its total impulse is 27.9 N-sec, average thrust is 23.3 newtons, peak thrust is 27.9 N-sec, and thrust duration is 1.2 seconds. Those numbers put it in the same total-impulse neighborhood as an E9 black powder motor, but the composite formulation and polymer case make it a different animal on the pad and in storage.
E26-10W Specs That Affect Your Build
- Q-Jet™ E26-10W White Lightning Complete 2-Motor Launch Pack - Q6144: Motor Diameter: 0.938 inches (24mm); Casing Length: 2.75 inches (70mm) Confirm your rocket's motor mount accepts a 24mm motor and has room for a 70mm casing before you buy.

Q-Jet™ E26-10W White Lightning Complete 2-Motor Launch Pack - Q6144 - Q-Jet™ E26-10W White Lightning Complete 2-Motor Launch Pack - Q6144: Maximum Liftoff Weight: 340 grams This is the manufacturer's stated ceiling for the motor. Weigh your rocket fully loaded—including recovery gear—and stay under it.
- Q-Jet™ E26-10W White Lightning Complete 2-Motor Launch Pack - Q6144: Motor Weight: 44 grams; Propellant Weight: 18.3 grams The lightweight composite case helps keep your rocket's total liftoff weight down compared with black powder motors of similar impulse.
- Q-Jet™ E26-10W White Lightning Complete 2-Motor Launch Pack - Q6144: Delay Time: 10 seconds A 10-second delay is a long coast. It suits rockets that carry speed and altitude well; a draggy or heavy rocket may still be climbing when ejection fires.
Why White Lightning Composite Motors Behave Differently
Q-Jet motors use a high-strength polymer case and bulkhead with a ceramic nozzle and a White Lightning composite propellant formulation. Quest states that this propellant produces nearly double the specific impulse of conventional black powder. In practical terms, the E26-10W delivers its total impulse in a lighter package: Quest notes it has the same total impulse as an E9 black powder motor while weighing 68.1% as much, and 2.2% more total impulse than an E12 while weighing 74.9% as much.
The visible difference on the pad is the exhaust: a brilliant white plume, dense bright white smoke, and a throaty roar. That makes the E26-10W easy to track and exciting to watch—useful when you're flying a small rocket that gets hard to see against a bright sky.
Storage is another practical difference. Quest states that Q-Jet motors are not susceptible to thermal cycling like black powder motors, and that all Q-Jet motors are U.S. mailable with no hazmat fee. That doesn't mean you can store them carelessly, but it does make ordering and keeping them less fussy than black powder.
Before You Install: Check the Rocket, Not Just the Motor
The supplied information for this launch pack does not include a step-by-step installation procedure or a motor retention method. Rather than guess at torque values or adapter requirements, use the motor's physical specs as your checklist: a 24mm mount, 70mm of casing length, and a fully loaded rocket at or under 340 grams. If your rocket uses a different motor mount diameter or a proprietary retention system, check the rocket manufacturer's instructions before assuming the E26-10W will drop in.
The 10-second delay deserves its own check. A long delay means the rocket coasts for a long time after burnout. If your rocket is heavy for its size or has high drag, it may not reach the speed and altitude that make a 10-second delay appropriate. The catalog does not supply a recommended rocket weight or delay-selection chart for the E26-10W, so treat the 340-gram maximum liftoff weight as a ceiling, not a target.
Launch-Day Prep for the E26-10W
- Weigh the fully loaded rocket: Include the motor, recovery wadding, parachute, and any payload. Stay at or below the 340-gram maximum liftoff weight stated for the motor.
- Fit-check the motor in the mount: The casing is 0.938 inches (24mm) in diameter and 2.75 inches (70mm) long. Confirm it seats fully without forcing it, and follow your rocket's own retention instructions.
- Install the FirstFire Micro Initiator: The pack includes FirstFire Micro Initiators. The supplied information does not include a specific initiator-placement procedure for this motor, so follow the initiator packaging and your launch controller's instructions.
- Pack the recovery wadding: Use the included bright orange Parachute Recovery Wadding according to your rocket's recovery-system instructions. The catalog does not specify a quantity per flight.
- Check certification and site rules: The E26-10W is certified by the Tripoli Rocketry Association (TRA), the National Association of Rocketry (NAR), and the Canadian Association of Rocketry (CAR). Confirm your launch site and club allow this motor class before you fly.
What the Pack Doesn't Tell You
The supplied product information covers the motors, initiators, and wadding, but it does not list a complete package inventory beyond those items, nor does it include motor retention hardware, a launch controller, or a launch pad. It also doesn't provide a delay-adjustment method—the 10-second delay is supplied as-is. If you need a different delay for your rocket, this pack is not the tool for that job.
Finally, the catalog does not state an age rating or a full set of operating warnings for this launch pack. Model rocket motors are not toys, and the absence of a listed age range in the supplied information should not be read as permission for unsupervised use. Follow the motor packaging, your national rocketry association's safety code, and your launch site's rules.


