What the Enerjet E30-7T 2-Motor Pack Offers
The Enerjet E30-7T 2-Motor Pack includes two single-use composite propellant model rocket motors and two FirstFire Jr. initiators. These are mid-power motors (24mm diameter, 2.75 inches long) that deliver a total impulse of 33.56 N-sec with an average thrust of 33 newtons. The 7-second delay gives you time for the rocket to coast before the ejection charge deploys the recovery system.
The composite propellant uses AeroTech's Blue Thunder formulation, which produces a bright violet-blue flame with minimal smoke. The motors are certified by TRA, NAR, and CAR, and they ship without hazmat fees within the U.S.
Motor Specifications at a Glance
- Enerjet by AeroTech E30-7T 2-Motor Pack - 53007: Motor diameter: 0.938 inches (24mm); casing length: 2.75 inches (70mm); propellant weight: 17.88 grams; motor weight: 47 grams. These dimensions tell you if the motor fits your rocket's motor mount tube. Most standard 24mm mid-power rockets accept this size.

Enerjet by AeroTech E30-7T 2-Motor Pack - 53007 - Enerjet by AeroTech E30-7T 2-Motor Pack - 53007: Total impulse: 33.56 N-sec; average thrust: 33 newtons; peak thrust: 49.3 N; thrust duration: 1.02 seconds; delay time: 7 seconds. The 7-second delay is fixed, so you need a rocket that stays stable during coast and deploys the parachute at the right altitude. This delay suits medium-weight rockets flying to moderate altitudes.
Compatibility Considerations
The E30-7T fits any rocket with a 24mm motor mount tube. It is a single-use motor, so you do not need reloadable hardware. Because the delay is fixed at 7 seconds, check that your rocket's weight and expected altitude work with that timing. AeroTech/Quest does not publish a maximum liftoff weight for these motors, so you will need to simulate your rocket using RockSim or OpenRocket to confirm safe performance.
The motor pack includes two motors and two initiators, giving you two flights. The Blue Thunder propellant provides higher thrust than White Lightning of the same impulse, which helps with lift-off acceleration for heavier rockets.
What to Check Before Buying
- Motor mount diameter: Your rocket must have a 24mm (0.938 inch) motor mount tube. Measure your existing mount or check the kit specifications.
- Delay timing: The 7-second delay is fixed. If your rocket is very light or very heavy, the delay may be too long or too short. Use simulation software to estimate the optimal delay.
- Rocket weight and stability: No official weight limit is provided. Simulate your rocket to ensure the motor provides enough thrust for a safe liftoff and that the delay fires the ejection charge at the right altitude.
- Shipping restrictions: These motors are U.S. mailable with no hazmat fee, which simplifies ordering. International customers should verify local regulations.
Who Should Choose the E30-7T Pack
This motor pack suits modelers who want a reliable, high-thrust mid-power motor for rockets that can accept a 24mm mount and a 7-second delay. The two-pack format gives you two flights at a lower per-motor cost than buying singles. The composite propellant is more consistent than black powder motors, and the Blue Thunder flame adds visual appeal.
If your rocket requires a different delay time or you prefer reloadable motors, look at AeroTech's RMS line. For lighter rockets, a shorter delay or lower total impulse motor may be a better fit.


