AeroTech RMS-29/240 Motor Hardware Set: What's Included
By Quest Q-jet | Published: 2026-10-21
Category: Product Reviews
Get a clear breakdown of the AeroTech RMS-29/240 Complete Motor Hardware Set contents, including the forward seal disc purpose and assembly tips for high power rocketry.
Quick Answer
The AeroTech RMS-29/240 Complete Motor Hardware Set (product 2924M) includes the aluminum motor case, forward closure, forward seal disc, aft closure, and Super-Lube grease—everything you need to fly AeroTech RMS-29/240 high power reloads.
Why the forward seal disc matters
The forward seal disc is a small but critical component included in the RMS-29/240 set. It sits between the forward closure and the reload propellant grain, creating a gas-tight seal that prevents hot combustion gases from bypassing the grain and damaging the forward closure. Without it, the motor could fail catastrophically. This disc is specific to the 29/240 system and is not interchangeable with other AeroTech RMS sizes.
Reload compatibility limits
This hardware set is designed exclusively for AeroTech RMS-29/240 high power reload kits. It is not compatible with Mid Power RMS products or any other 29mm reloads. Always verify the reload kit part number matches the hardware case length (240 mm) before assembly. Using an incompatible reload can cause dangerous overpressure or case rupture.
Frequently Asked Questions
- What exactly comes in the box?
- The AeroTech RMS-29/240 Complete Motor Hardware Set (2924M) includes: one aluminum motor case (29 mm diameter, 240 mm length), one forward closure, one forward seal disc, one aft closure, and a 1 cc tube of Super-Lube grease. Motor reloads are sold separately.
- What is the forward seal disc for?
- The forward seal disc creates a tight seal between the forward closure and the reload propellant grain. It prevents hot gases from leaking around the grain, which could damage the closure or cause motor failure. Always install it during assembly. Never omit the forward seal disc; it is essential for safe motor operation.
- Is this hardware set compatible with all 29mm reloads?
- No. This set is only compatible with AeroTech RMS-29/240 high power reload kits. It is not compatible with Mid Power RMS products or any other 29 mm reloads. Check the reload kit label for the '29/240' designation before use. Always match the reload kit to the hardware case length (240 mm).
- How do I assemble the motor with this hardware?
- Apply a thin layer of Super-Lube grease to the O-rings on the closures. Insert the reload propellant grain into the case, then the forward seal disc, and finally the forward closure. Install the aft closure with the nozzle and delay element. Torque all closures to AeroTech's recommended values. See the included instructions or the AeroTech website for detailed steps. Grease O-rings lightly; over-torquing can damage threads.
- Can I reuse the hardware set?
- Yes, the hardware set is reusable. After each flight, disassemble, clean all parts with a mild solvent, inspect for wear or damage (especially O-rings and threads), and store in a dry place. Replace O-rings as needed. The case and closures are aluminum and can last many flights with proper care. Inspect O-rings and threads before each reuse; replace if damaged.
Product Details
- AeroTech RMS-29/240 Complete Motor Hardware Set (with Forward Seal Disc) - 2924M: This reusable hardware set includes the aluminum motor case, motor forward closure, forward seal disc, motor aft closure, and a 1cc tube of Super-Lube grease for assembly. You get all the reusable components needed to fly multiple RMS-29/240 reloads; only the reload kits are purchased separately.

AeroTech RMS-29/240 Complete Motor Hardware Set (with Forward Seal Disc) - 2924M
