Where Quick-Cure earns a place on the bench
AeroTech Quick-Cure 5 minute epoxy is a fast-setting adhesive that cures to a slightly flexible consistency. That flexibility is the point: the bond resists the brittleness that can crack under vibration or stress, so it suits joints that will see handling and flight loads rather than a static shelf life.
The working window is short. Items bonded with Quick-Cure can be handled after 15 minutes, and full strength is reached in 1 hour. Treat those figures as the clock for your whole process, not just the glue-up: dry-fit first, lay out clamps and tape, and have every part within reach before you mix.
What the 99220 package tells you
- AeroTech Quick-Cure 5 Minute Epoxy 9.0 Ounces - 99220: Quick-Cure 5 minute epoxy cures to a slightly flexible consistency. Flexible cured epoxy is the reason to choose this product for joints that see vibration or stress, rather than a rigid, brittle bond.

AeroTech Quick-Cure 5 Minute Epoxy 9.0 Ounces - 99220 - AeroTech Quick-Cure 5 Minute Epoxy 9.0 Ounces - 99220: Items bonded with Quick-Cure can be handled after 15 minutes; full strength is reached in 1 hour. These are the checkpoints that set your clamping and handling schedule, so plan the glue-up around them.
- AeroTech Quick-Cure 5 Minute Epoxy 9.0 Ounces - 99220: Quick-Cure can be mixed with microballoons to form a quick setting putty. That gives you a filleting option from the same bottle, without reaching for a separate filler product.
A practical sequence for a fin or motor mount joint
The steps below assume you have already checked your kit instructions for the joint in question. They describe how to use Quick-Cure, not how to redesign the rocket.
- Dry-fit and mark: Assemble the parts without adhesive, confirm alignment, and mark the final position. Once Quick-Cure is mixed you have minutes, not hours, to correct a mistake.
- Stage your clamps and tape: Have every clamp, tape strip, and support block within reach before mixing. The 15-minute handle time is only useful if you are not searching for a clamp at minute ten.
- Mix a small batch: Mix only what you can apply within the working window. A second small batch is faster than rescuing a batch that has started to set.
- Apply and assemble: Spread the epoxy on the joint surfaces, assemble, and clamp or tape in place. For fin fillets, mix with microballoons to form a putty that stays where you place it.
- Respect the 15-minute handle time: Leave the joint undisturbed until the 15-minute mark before handling. Full strength is reached in 1 hour, so schedule any load-bearing step after that.
Fin fillets: when the putty mix helps
Fin fillets are one of the places where Quick-Cure's slightly flexible cure is useful. A fillet that stays slightly flexible can better tolerate the vibration and stress of flight than a brittle one. Mixing Quick-Cure with microballoons gives you a quick-setting putty that is easier to shape into a fillet than plain epoxy.
The supplied information does not give a microballoon ratio, so follow the microballoon package directions rather than guessing. If you need a longer shaping window for large or complex fillets, a slower epoxy may be the better choice; Quick-Cure's short working time is the tradeoff for its speed.
Jobs that suit Quick-Cure and jobs that do not
- Motor mounts and internal structure: A good fit. The slightly flexible cure handles vibration and stress, and the short clamp time keeps a build moving.
- Fin fillets with microballoons: A good fit for small to medium fillets where you can shape quickly. Use a slower epoxy if you need more working time.
- Areas with long-term water immersion: Not suitable. Quick-Cure should not be used where the joint will be subject to long-term immersion in water.
- Internal structure of wood-framed boats: Suitable, according to the supplied information, even though long-term immersion is not.
- Joints that will receive polyester resin: Suitable. Quick-Cure is the only epoxy in the supplied range on which you can apply polyester resins.
Compatibility and limitation to check before you glue
- AeroTech Quick-Cure 5 Minute Epoxy 9.0 Ounces - 99220: Quick-Cure is the only epoxy on which you can apply polyester resins. If your finishing schedule includes polyester resin, this is the epoxy to use; other epoxies in the range are not confirmed for that combination.
- AeroTech Quick-Cure 5 Minute Epoxy 9.0 Ounces - 99220: Quick-Cure should not be used in areas subject to long-term immersion in water. Keep it away from joints that will sit underwater; it remains suitable for the internal structure of wood-framed boats.
What the supplied information does not cover
The catalog record for the 99220 package does not list a mix ratio, a full cure schedule beyond the 1-hour strength figure, or surface-preparation steps. Those details are not confirmed here, so check the product label and your kit instructions before mixing. The record also does not give a temperature range for use, so do not assume a working temperature without checking the packaging.


