The K750ST-PS Is a Level 2, Plugged Motor
The AeroTech K750ST-PS is a high-power reload kit, not a ready-to-fly motor. You need Level 2 certification through NAR or Tripoli to purchase it, and the seller will ask for proof of age and certification before shipping. Federal law prohibits selling this motor to anyone under 18.
The PS suffix means plugged with smoke. There is no motor-actuated delay or ejection charge, so your rocket must use a timer, altimeter, or radio-activated recovery system. If your build relies on motor ejection, this is the wrong reload.
K750ST-PS Specs That Shape Your Build
- AeroTech K750ST-PS RMS-75/1280 Reload Kit (1 Pack) - 11750P: Motor Diameter: 2.95 inches (75mm); Casing Length: 10.5 inches (266.7mm) Confirms this is a 75mm motor and helps you check mount fit before ordering.

AeroTech K750ST-PS RMS-75/1280 Reload Kit (1 Pack) - 11750P - AeroTech K750ST-PS RMS-75/1280 Reload Kit (1 Pack) - 11750P: Total Impulse: 1299 N-Sec; Peak Thrust: 836 N-sec Gives you the performance figures needed for your own simulation and rocket assessment.
- AeroTech K750ST-PS RMS-75/1280 Reload Kit (1 Pack) - 11750P: Propellant Weight: 595 grams; Motor Weight: 1812 grams Useful for weight and balance planning, though AeroTech does not publish a recommended maximum lift-off weight.
Hardware You Must Already Own
This reload kit requires AeroTech RMS-75/1280 motor hardware. The hardware is sold separately as a complete set or as individual parts, and it is reusable across compatible reloads. The kit also requires a forward seal disc (75FSD) during assembly, so check your hardware set includes one or that you have it on hand.
High Power RMS reload kits are not compatible with Mid Power RMS products. Do not try to fit this reload into a smaller or mid-power case.
What Comes in the Reload Kit
The kit includes one rocket motor reload, all internal motor components, and FirstFire initiators. The propellant is RCS Super Thunder, which produces a bright violet-blue flame with minimal exhaust smoke and a higher ISP than Blue Thunder. The delay is plugged with smoke, so there is no ejection charge to adjust or remove.
K750ST-PS vs Typical Motor-Ejection Reloads
The biggest practical difference is recovery. A standard reload with a delay and ejection charge can deploy your parachute at a set time after burnout. The K750ST-PS cannot do that.
- Recovery method: K750ST-PS requires electronic deployment (timer, altimeter, or radio). A motor-ejection reload does not.
- Delay adjustment: K750ST-PS has no user-adjustable delay; it is plugged. Standard reloads often let you swap or drill the delay.
- Use case: K750ST-PS suits rockets already set up for electronic recovery and flyers who want a bright, low-smoke flame.
Ordering and Shipping Checks
This item ships HAZMAT via UPS or FedEx, and orders will not ship until proof of age and Level 2 certification are received. Plan for extra time and signature requirements.
- Certification proof: Have a copy of your Level 2 NAR or Tripoli card ready when you order.
- Age proof: A copy of a driver’s license or similar ID is required.
- HAZMAT shipping: Expect HAZMAT fees and carrier-specific handling; not all expedited options will apply.
What the Catalog Does Not Tell You
AeroTech/Quest does not list a recommended maximum lift-off weight for this motor due to variables in rocket design. You will need to run your own simulation with RockSim or OpenRocket and verify stability and recovery. The supplied information also does not include step-by-step assembly instructions, so rely on the hardware documentation and your certification training.


