Back to Blog
Comparisons 2026-11-20 Quest Q-jet 0 views

AeroTech H268R vs H238T: 29mm Reload Kit Comparison

AeroTech H268R vs H238T: 29mm Reload Kit Comparison

Compare the AeroTech H268R Redline and H238T Blue Thunder 29mm reload kits. See which high-power motor fits your rocket's weight, thrust, and flight profile needs.

Choosing Between Two 29mm High-Power Reloads

If you're shopping for a 29mm high-power reload and deciding between the AeroTech H268R-14A RMS-29/360 and the H238T-14A RMS-29/180, you're looking at two distinctly different flight profiles. Both are Level 1 certified reload kits that require separate RMS hardware, but they differ in total impulse, propellant formulation, and the casing length they fit. This comparison focuses on the facts you need to match the motor to your rocket and your flying style.

Hardware and Compatibility Basics

  • AeroTech H268R-14A RMS-29/360 Reload Kit (1 Pack) - 082614: The H268R requires AeroTech RMS-29/360 motor hardware (casing length 12.7 inches / 322 mm). You must own or purchase the RMS-29/360 hardware set separately; this reload will not fit shorter casings.
    AeroTech H268R-14A RMS-29/360 Reload Kit (1 Pack) - 082614
    AeroTech H268R-14A RMS-29/360 Reload Kit (1 Pack) - 082614
  • AeroTech H238T-14A RMS-29/180 Reload Kit (1 Pack) - 082314: The H238T requires AeroTech RMS-29/180 motor hardware (casing length 7.25 inches / 184 mm). The shorter casing means a lighter overall motor assembly and a different fit in your rocket's motor mount tube.
    AeroTech H238T-14A RMS-29/180 Reload Kit (1 Pack) - 082314
    AeroTech H238T-14A RMS-29/180 Reload Kit (1 Pack) - 082314

Thrust, Impulse, and Burn Time

The numbers tell the story of two different launch experiences. The H268R delivers more total energy over a longer burn, while the H238T offers a sharp kick in a shorter window.

  • Total Impulse: H268R: 320 N-sec (H class, upper end). H238T: 175 N-sec (H class, lower end). The H268R has nearly double the total impulse, making it suitable for heavier rockets or flights needing more altitude.
  • Average Thrust: H268R: 268.5 newtons. H238T: 238 newtons. Despite the impulse difference, average thrust is fairly close; both provide strong acceleration off the rod.
  • Peak Thrust: H268R: 347 newtons. H238T: 276 newtons. The H268R's higher peak thrust gives a more aggressive initial push.
  • Thrust Duration: H268R: 1.10 seconds. H238T: 0.75 seconds. The H268R burns about a third longer, which can help with stability on heavier rockets and gives a longer flame trail.

Propellant Type and Flame Color

The H268R uses AeroTech's Redline propellant, which produces a visible scarlet flame. The H238T uses Blue Thunder propellant, which burns with a bright violet-blue flame and minimal smoke. Blue Thunder motors also deliver higher thrust for a given total impulse compared to White Lightning, making the H238T a good choice if you want rapid liftoff acceleration in a lighter rocket. Redline's burn rate sits between White Lightning and Blue Thunder, so the H268R offers a middle ground in thrust profile with a dramatic red exhaust.

Weight and Rocket Suitability

The H268R reload contains 166 grams of propellant and weighs 346 grams total. The H238T contains 80 grams of propellant and weighs 202 grams total. Heavier rockets (within reason) benefit from the H268R's higher total impulse and longer burn. Lighter to mid-weight high-power rockets can fly well on the H238T. Note that AeroTech/Quest does not publish maximum liftoff weights for these motors, so you should use simulation software like RockSim or OpenRocket to verify your specific rocket's stability and performance.

Delay Adjustment and Ignition

Certification and Purchasing Requirements

Both are high-power motors requiring Level 1 certification through NAR or Tripoli. Proof of age (18+) and Level 1 certification is required before shipping. The motors are certified by TRA, NAR, and CAR. They are U.S. mailable with no hazmat fee.

Related Articles

Customer Service
Home
Products
Cart
Profile