AeroTech F32-6T 24mm Motor Buying Guide
By Quest Q-jet | Published: 2026-10-27
Category: Buying Guides
Learn what the AeroTech F32-6T 24mm single-use motor offers, who it fits, and key decision rules for your mid-power rocket flights.
Quick answer
The AeroTech F32-6T is a reliable 24mm single-use motor for mid-power rockets, offering a solid balance of thrust and delay. It's best for rockets weighing up to about 2 pounds that need a 6-second delay.
Why choose a single-use motor?
Single-use motors like the F32-6T come pre-assembled with the propellant and delay already installed. You don't need to clean or reload hardware, making them a convenient choice for flyers who want a quick, reliable flight without extra gear.
The trade-off is cost per flight: single-use motors are generally more expensive than reloadable systems over time. If you fly often, a reloadable motor system might save money, but for occasional launches or testing a new rocket, the F32-6T is hard to beat.
What the 6-second delay means for your rocket
The '6T' in the name refers to a 6-second delay between motor burnout and ejection charge firing. This delay is critical: too long and the rocket deploys too late; too short and it deploys while still moving fast.
As a rule of thumb, a 6-second delay suits rockets that coast for a while after burnout—typically heavier models or those with higher drag. Lighter rockets may need a shorter delay, so check your rocket's estimated delay before buying.
Decision rules for the F32-6T
- Check your rocket's weight: Use the F32-6T for rockets with a liftoff weight between 1 and 2 pounds (450–900 g). If your rocket is heavier, consider a higher-thrust motor; if lighter, a lower-thrust option may give a more gentle ride. Weigh your rocket fully loaded before buying.
- Match the delay to your rocket: The 6-second delay works best for rockets that coast for several seconds after burnout. If your rocket is very light or has low drag, it may deploy too late; if it's heavy or draggy, it may deploy too early. Estimate your rocket's coast time using simulation software or prior flights.
- Consider your launch site: The F32-6T is a mid-power motor (F class), so it requires a dedicated mid-power launch pad and a larger field—typically at least 500 feet in diameter. Check your local club's rules before flying. Verify your launch site meets mid-power safety codes.
Key product facts
- AeroTech F32-6T 24mm x 95mm Single Use 1-Motor Pack - 63206: This motor uses a high-performance composite propellant from the same family as NASA's Space Shuttle Boosters and military missiles. You get a reliable, consistent burn that's been proven in demanding applications, so your flight is less likely to suffer from thrust irregularities.
AeroTech F32-6T 24mm x 95mm Single Use 1-Motor Pack - 63206
Who should buy the F32-6T?
Best for
- Rocket flyers with mid-power rockets weighing 1–2 pounds who want a simple, no-hassle single-use motor.
- Those who fly occasionally and prefer not to invest in reloadable hardware.
Not for
- Flyers with very light rockets that need a shorter delay.
- Frequent flyers who would save money with a reloadable motor system.
